Product ID:EA 9460 PART A
MSDS Date:05/25/1988
FSC:8040
NIIN:00N015071
Kit Part:Y
MSDS Number: BKPRX

DEXTER HYSOL AEROSPACE INC DIV OF EXTER CORP

2850 WILLOW PASS ROAD
PITTSBURG, CA 94565-3237
US

Emergency Phone: 510-458-8000

Info Phone: 510-458-8000

Preparer: SUZANNE FRANZ

Cage: 33564

DEXTER CORPORATION ADHESIVE & COATING SYSTEMS

312 BAY POINT, CA 94565-3299 US

Telephone: 202-483-7616

Cage: 33564

SILICA, CRYSTALLINE - QUARTZ

CAS: 14808-60-7

RTECS: VV7330000

Fraction By Weight: <40%

OSHA PEL SEE TABLE Z3

ACGIH TLV: 0.1 MG/M3 RDUST;9293

EPOXY RESIN SYSTEM

SILICA

CAS: 7631-86-9

Fraction By Weight: <35%

TITANIUM DIOXIDE

CAS: 13463-67-7

RTECS: XR2275000

Fraction By Weight: <03%

OSHA PEL 15 MG/M3 TDUST

ACGIH TLV: 10 MG/M3 TDUST; 9293

LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:YES OSHA:NO
Health Hazards Acute and Chronic:MAY CAUSE SKIN IRRITATION AND POSSIBLE
ALLERGIC REACTIONS. PROLONGED AND REPEATED CONTACT MAY CAUSE
SENSITIZATION WHICH WILL RESULT IN ALLERGIC REACTIONS.
Explanation of Carcinogenicity:CRYSTALLINE SILICA-IARC 2B.
Effects of Overexposure:SKIN RASH, IRRITATION.
Medical Cond Aggravated by Exposure:NOT APPLICABLE.

First Aid:FLUSH SKIN AND EYE CONTACT WITH PLENTY OF WATER FOR AT LEAST
15 MINUTES. WASH SKIN THOROUGHLY WITH SOAP AND WATER, RUBBING
ALCOHOL OR HAND CLEANER. DO NOT USE SOLVENTS. REMOVE SOILED
CLOTHING AND WASH BEFORE REUSE. IF IRRITATION PERSISTS, SEE MD.
INGEST: CALL MD IMMEDIATELY . INHAL: REMOVE TO FRESH AIR. SUPPORT
BREATHING (GIVE O*2/ARTF RESP) .

Flash Point Method:TOC
Flash Point:>300F,>149C
Extinguishing Media:DRY CHEMICAL OR HALON FIRE EXTINGUISHER, OR WATER
SPRAY, FOAM OR FOG.
Fire Fighting Procedures:USE NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:DENSE SMOKE AND TOXIC GASES MAY BE
LIBERATED.

Spill Release Procedures:WEAR PROTECTIVE CLOTHING, GLOVES AND SAFETY
GLASSES. SCRAPE UP AND TRANSFER TO METAL CONTAINER. WIPE UP
REMAINING RESIDUE WITH SOLVENTS, OBSERVING SOLVENT FLAMMABILITY
CAUTIONS.
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.

Handling and Storage Precautions:KEEP COOL IN ACCORDANCE WITH LABEL
INSTRUCTIONS. STORE AT ROOM TEMPERATURE (77F) FOR 12 MONTHS.
Other Precautions:FOLLOW RECOMMENDED CURING SCHEDULE. CAUSES EYE
IRRITATION AND MAY CAUSE SKIN IRRITATION AS ALLERGIC DERMAT.
CONTAINS EPOXY RESINS. AVOID CONTACT WITH EYES OR SKIN.

Respiratory Protection:NOT NEEDED WITH GOOD INDUSTRIAL VENTILATION.
NIOSH/MSHA APPROVED RESPIRATOR APPROPRIATE FOR EXPOSURE OF CONCERN
.
Ventilation:LOCAL EXHAUST RECOMMENDED.
Protective Gloves:IMPERVIOUS PLASTIC OR RUBBER.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:AS NEEDED TO PROTECT SKIN AND CLOTHING.
Work Hygienic Practices:WASH THOROUGHLY AFTER HANDLING.
Supplemental Safety and Health
CNDTNS (POLYM): CURING SURFACES TO BE BONDED. FAILURE TO OBSERVE
CAUTION MAY RESULT IN EXCESSIVE HEAT BUILD-UP WITH THE RELEASE OF
TOXIC GASES.

HCC:N1
Boiling Pt:B.P. Text:DECOMPOSES
Vapor Pres:NIL
Vapor Density:NIL
Spec Gravity:1.35
Evaporation Rate & Reference:NIL
Solubility in Water:NIL
Appearance and Odor:WHITE, THIXOTROPIC PASTE.

Stability Indicator/Materials to Avoid:YES
STRONG OXIDIZING AGENTS, STRONG LEWIS OR MINERAL ACIDS.
Stability Condition to Avoid:NOT APPLICABLE.
Hazardous Decomposition Products:CO, NO*X, ALDEHYDES, ACIDS AND
UNDETERMINED ORGANICS.
Conditions to Avoid Polymerization:AVOID MIXING RESIN & CURING AGENT IN
BATCHES >2 LBS TOTAL. DO NOT HEAT MIXED ADHESIVE ABOVE 150F UNLESS
(SEE SUPP DATA)

Waste Disposal Methods:DISPOSE OF AS HAZARDOUS WASTE ACCORDING TO DOT
HAZARD CLASS. IF NOT REGULATED BY DOT, DISPOSE OF AS ORM-E.

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.